Professional in every sense! Performance, build, audio andoperation
– 5W output power, 136-174MHz full VHF coverage
– Professional RF performance, resistance to interference
– 750mW* loud and intelligible audio with BTL amplifier
and large 36mm speaker
* Typical value with internal speaker.
– IP54 and MIL-STD-810 rugged construction
– Large capacity Li-Ion battery pack provides 18.5 hours*
of operating time
* Typical operation. 5:5:90 duty cycle with auto power save.
– Wide/narrow channel spacing
– Integrated VOX function
– 200 channels
– Built-in CTCSS and DTCS encoder/decoder
– 5 character alphanumeric display
– Priority, memory and skip scanning
– 16 DTMF autodial memories
– Repeater lockout and busy channel lockout
– Time-out-timer
– Power save function and auto power off
– PC programmable (with optional CS-G80)
– Transceiver-to-transceiver cloning (with optional OPC-474)
General
| IC-G80 | |||
| Frequency range | 136MHz–174MHz | ||
| Number of channels | 200 channels | ||
| Channel spacing | 12.5kHz/25kHz | ||
| Type of emission | F2D/F3E | ||
| Current drain | Tx | 1.4A (5W) | |
| Rx | Stand-by | 60mA typ. | |
| Max. audio | 300mA (Internal SP) | ||
| Dimensions (W×H×D) (Projections are not included) |
58×112×30 mm | ||
| Weight | 140g (Without battery pack) 360g (With BP-264 and antenna) |
||
Transmitter
| IC-G80 | |
| RF output power (at 7.2V DC) | 5.0/2.5/0.5W (High/Mid/Low) |
| Spurious emissions | Less than -70dB |
| Frequency stability | ±2.5ppm |
Receiver
| IC-G80 | ||
| Sensitivity (at 12dB SINAD) | 0.18μV typ. | |
| Adjacent channel selectivity (W/N) | 72/65dB typ. | |
| Spurious & Image rejection | 80dB typ. | |
| Intermodulation rejection | 72dB typ. | |
| AF output power (at 5% distortion ) |
Internal SP (With 16Ω load) |
750mW typ. |
| External SP (With 8Ω load) |
420mW typ. | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
| Low Pressure Storage | 500.4 I |
| Low Pressure Operation | 500.4 II |
| High Temperature Storage | 501.4 I |
| High Temperature Operation | 501.4 II |
| Low Temperature Storage | 502.4 I |
| Low Temperature Operation | 502.4 II |
| Temperature Shock | 503.4 I |
| Solar Radiation | 505.4 I |
| Rain Blowing | 506.4 I |
| Rain Drip | 506.4 III |
| Humidity Induced | 507.4 |
| Salt Fog | 509.4 |
| Dust Blowing | 510.4 I |
| Vibration | 514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop | 516.5 IV |
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
| Dust & Water | IP54 (Dust-protection and water resistant) |
