Professional in every sense! Performance, build, audio andoperation
- 5W output power, 136-174MHz full VHF coverage
- Professional RF performance, resistance to interference
- 750mW* loud and intelligible audio with BTL amplifier
and large 36mm speaker
* Typical value with internal speaker.
- IP54 and MIL-STD-810 rugged construction
- Large capacity Li-Ion battery pack provides 18.5 hours*
of operating time
* Typical operation. 5:5:90 duty cycle with auto power save.
- Wide/narrow channel spacing
- Integrated VOX function
- 200 channels
- Built-in CTCSS and DTCS encoder/decoder
- 5 character alphanumeric display
- Priority, memory and skip scanning
- 16 DTMF autodial memories
- Repeater lockout and busy channel lockout
- Time-out-timer
- Power save function and auto power off
- PC programmable (with optional CS-G80)
- Transceiver-to-transceiver cloning (with optional OPC-474)
General
| |
IC-G80 |
| Frequency range |
136MHz–174MHz |
| Number of channels |
200 channels |
| Channel spacing |
12.5kHz/25kHz |
| Type of emission |
F2D/F3E |
| Current drain |
Tx |
1.4A (5W) |
| Rx |
Stand-by |
60mA typ. |
| Max. audio |
300mA (Internal SP) |
Dimensions (W×H×D)
(Projections are not included) |
58×112×30 mm |
| Weight |
140g (Without battery pack)
360g (With BP-264 and antenna) |
Transmitter
| |
IC-G80 |
| RF output power (at 7.2V DC) |
5.0/2.5/0.5W (High/Mid/Low) |
| Spurious emissions |
Less than -70dB |
| Frequency stability |
±2.5ppm |
Receiver
| |
IC-G80 |
| Sensitivity (at 12dB SINAD) |
0.18μV typ. |
| Adjacent channel selectivity (W/N) |
72/65dB typ.
|
| Spurious & Image rejection |
80dB typ. |
| Intermodulation rejection |
72dB typ. |
AF output power
(at 5% distortion ) |
Internal SP
(With 16Ω load) |
750mW typ. |
External SP
(With 8Ω load) |
420mW typ. |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 F
Method, Proc. |
| Low Pressure Storage |
500.4 I |
| Low Pressure Operation |
500.4 II |
| High Temperature Storage |
501.4 I |
| High Temperature Operation |
501.4 II |
| Low Temperature Storage |
502.4 I |
| Low Temperature Operation |
502.4 II |
| Temperature Shock |
503.4 I |
| Solar Radiation |
505.4 I |
| Rain Blowing |
506.4 I |
| Rain Drip |
506.4 III |
| Humidity Induced |
507.4 |
| Salt Fog |
509.4 |
| Dust Blowing |
510.4 I |
| Vibration |
514.5 I |
| Shock Functional |
516.5 I |
| Shock Transit Drop |
516.5 IV |
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
| Dust & Water |
IP54 (Dust-protection and water resistant) |
|